alproof
drum_vac_delay
dvac
Trendsetter_400/800_Proofing
This parameter is obsolete after Spectrum firmware version 1.1. It is optimized with
a dvac monitoring routine.
Sets the number of seconds to wait for the drum vacuum to suck down media firmly
onto the drum.
This parameter is not used when waiting for the measured vacuum pressure to
build, that is done by a fixed 5 second delay. This parameter is used during
loading receivers and donors, to wait for the drum vacuum during the various
stages of winding the media onto the drum.
uint32
3 (obsolete after version 1.1)
0 to 15 seconds
If you really want to see when this delay is being used, turn up the "alcmd"
verbose level to 2 and watch for the diagnostic message "waiting for the media
to suck down", which happens twice for each proofing media load.
cal